UT260-104

UNDER TABLE HDMI TO HDBASET RECEIVER

  • Receive Audio/Video/Control up to 70m over one Cat 6/Cat 6A/Cat 7 cable
  • Support VGA with WUXGA resolution, HDMI 4k x 2K, DP 1.2 with 4K@30Hz
  • HDCP 1.4 compliant
  • IR and RS-232 pass through
  • Remote power from HDBT transmitter
  • Status LED on front
  • As seen in the Altinex Tabletop Interconnect Guide
  • Three (3) year warranty

UT260-104 Overview

The UT260-104 HDBT Receiver is a high performance HDBT receiver with HDMI output. In addition to video, the UT260-104 also allows both IR and RS-232 control signals from the transmitter to the receiver, or from the receiver to the transmitter. The RS-232 port is independently configurable allowing different baud rates than the transmitter.

Summary

The UT260-104 HDBT Receiver is a high performance HDBT receiver with HDMI output. In addition to video, the UT260-104 also allows both IR and RS-232 control signals from the transmitter to the receiver, or from the receiver to the transmitter. The RS-232 port is independently configurable allowing different baud rates than the transmitter.

The TX+RX system supports manual or auto-switching modes, pass-through IR or RS-232 controls, and custom audio selection. Auto-switching automatically switches to the newest input. Manual control allows the switch to be controlled from user interface momentary switches, RS-232 protocols, or via the built-in web server. A special feature gives the user the ability to select between using the embedded audio (HDMI/DP) or the external audio from the 3.5mm audio input port. The external audio is automatically selected with the VGA input, but can also be used to override the HDMI or DP embedded audio.

A power supply is included with the UT260-104, or the UT260-104 receiver can be powered by the UT260-103 transmitter when used with a direct connection between the transmitter and receiver.

Technical Specifications

Application Diagram

Dimensions

Related Products

Downloads

Feedback

There are no reviews yet.