взять займ без отказа
Select Page

UT260-103

UNDER TABLE 3X1 HDMI/VGA/DP SWITCH HDBASET OUT

  • Transmit Audio/Video/Control up to 70m over one Cat 6/Cat 6A/Cat 7 cable
  • Support VGA with WUXGA resolution, HDMI 4k x 2K, DP 1.2 with 4K@30Hz
  • Auto/manual switching
  • Internal/external audio selection
  • RS232 or web server for control/configuration
  • HDCP 1.4 compliant
  • IR and RS-232 pass through
  • Switching via Button/RS232/Contact Closure/Web Server
  • Remote power for HDBT receiver
  • Status LED for all connections on front
  • EDID Management
  • As seen in the Altinex Table Top Interconnect Guide
  • Three (3) year warranty
SKU: UT260-103 Categories: ,

  UT260-103 Overview

The UT260-103 switcher is a high performance three-input, one-output HDMI/VGA/DisplayPort switch with HDBT output and works with the UT260-104 receiver.

  Summary

The UT260-103 Switch is a high performance three-input, one-output HDMI/VGA/DisplayPort switch with HDBT output and works with the UT260-104 receiver. The switch/transmitter supports HDCP repeater functions along with fast switching among input ports providing a great way to convert popular video formats (HDMI, VGA, DisplayPort) to HDBT and transmit them over an existing network or over a single cable. In addition to video, the UT260-103 also allows both IR and RS232 control signals to from the transmitter to the receiver, or from the receiver to the transmitter. The RS232 ports are independently configurable allowing different baud rate at the transmitter and receiver ends depending on the requirements of the control equipment.

The TX+RX system supports manual or auto-switching modes, pass-through IR or RS232 controls, and custom audio selection. Auto-switching automatically switches to the newest input. Manual control allows the switch to be controlled from user interface momentary switches, RS232 protocols, or via the built-in web server. A special feature gives the user the ability to select between using the embedded audio (HDMI/DP) or the external audio from the 3.5mm audio input port. The external audio is automatically selected with the VGA input, but can also be used to override the HDMI or DP embedded audio.

A power supply is included with the UT260-103 and is cable of providing remote power to the UT260-104 receiver when used with a direct connection between the transmitter and receiver.

  Videos

  Technical Specifications

Table 1: UT260-103 General

Features/Description

UT260-103

INPUT CONNECTORS

Digital Video + AudioHDMI F, Type A (1)
VGA Video15-pin HD F (1)
Analog Audio3.5 mm F (1)
DisplayPort VideoDP F (1)
PowerDC Jack 2.5 mm F (1)

OUTPUT CONNECTORS

HDMI over HDBTRJ-45 F (1)

CONTROL

Web serverRJ-45 F (1)
RS232/Input SelectTerm Blk. 5 position (2)
IR Output (to emitter)3.5 mm F (1)
IR Input (from sensor)3.5 mm F (1)

COMPATIBILITY

Digital Signal typesHDMI 1.4, 3D, 4K 30Hz
DP 1.2
Signal resolutionUp to 4K x 2K 30Hz
VGAVESA up to 1920 x 1080

ACCESSORIES INCLUDED

Power Supply24V/1A Power Adapter (1)
Mounting BracketsRight Angle (2)
Terminal Blocks5 position, 3.5 mm (2)

Table 2: UT260-103 Mechanical

Mechanical

UT260-103

MaterialSteel
ColorBlack
Height1.14 in (29 mm)
Width4.06 in (103 mm)
Length7.48 in (190 mm)
Weight1.3 lb (0.6 kg)
T° Operating10°C-40°C
Humidity60% RH non-condensing
MTBF (calc.)38,000 hrs.

Table 3: UT260-103 Electrical 

Electrical

UT260-103

Video Input Signals

Digital Video + AudioHDMI Standard
VGA video
sync
1.0 Vp-p max.
TTL +/-
Display PortDisplay Port 1.2

Audio Input Signals

Analog Audio1.2 Vp-p max.

Output Signals

Digital Video + Audio on
HDBT
Altinex Standard

Power

+24VDC500 mA, 24 W

  Application Diagram

  Dimensions

  Related Products

UT260-102 – UNDER TABLE 4X1 HDMI/VGA/DP SWITCH HDMI OUT

UT260-104 – UNDER TABLE HDMI TO HDBASET RECEIVER

  Documents